Proper use of pet feed production equipment
Proper use of pet feed production equipment
1, pet food, long-term operation, the equipment should be fixed on the basis of cement. If change often work site, pet feed equipment and motor to install on the made of Angle iron frame, if pet food diesel powered equipment, should make the two power match, namely power slightly larger than the pet feed equipment power of diesel engine, and make the pulley groove of the two is consistent, pulley end on the same plane.
2, after the installation of pet feed equipment to check the fastening of each part of the fastener, if there is loose must be tightened.
3. Check whether the belt tightness is appropriate and whether the motor shaft and the pet feed equipment shaft are parallel.
4. Before starting the pet feed equipment, rotate the rotor by hand to check whether the operation of the claw, hammer and rotor is flexible and reliable, whether there is collision in the shell, whether the rotation direction of the rotor is consistent with the direction indicated by the arrow on the machine, and whether the motor and pulverizer are well lubricated.
5, do not replace the pulley, in case the speed is too high to make the crushing room explosion, or the speed is too low to affect the work efficiency.
6. After the grinding table is started, it should be idled for 2 to 3 minutes, and then put into operation after there is no abnormal phenomenon.
7. Pay attention to the operation of the pet feed equipment at any time during the work, and feed should be even to prevent blocking and stupor, and do not overload for a long time.
8, the crushed materials should be carefully checked, so as to avoid copper, iron, stone and other hard objects into the crushing room caused accidents.
9, operators do not wear gloves, feeding should be standing on the side of the pet feed equipment, in order to prevent the rebound sundries hurt the face.
10. When blocked, it is strictly prohibited to force feed in or pull out the feed with hands or sticks.
If you want to know other aspects of the pet feed production line, you can consult us, we will serve you!
